LM18IM6 Industrial High Spin Washing Machine
High-speed spin washer for industrial laundries, institutions, dry cleaners, etc.
One-piece cast iron housing with 2 SKF bearings and graphite bushing sealing
Stainless steel tank, drum and body
Large 400 mm loading opening
Configurable microprocessor for simple use
Reduced water consumption, precise management down to the centimeter
Electric heating via Incoloy stainless steel elements and/or direct steam
2-year warranty on all parts / 4-year warranty on the landing
Tank, drum, front and side top panels in AISI304 stainless steel
Heavy-duty welded steel frame
Suspended tank with 8 combined spring and shock absorbers
Laundry capacity 18 kg, drum 180 litres diameter 700 mm
One-piece cast iron bearing on the rear of the drum, supported by a robust, welded A-frame frame to absorb vibrations
2 oversized SKF bearings with grease fittings, shaft sealing by graphite rings
Cast iron pulley drive with 2 V-belts
Three-phase motor with magneto-thermal overload protection, 3 kW power
Spin speed 950 rpm / G factor 353
A 400 mm diameter porthole ensures fast loading/unloading.
ISO standard 3-point detergent dispenser, on top of the washing machine
Electric heating with three 4 kW Incoloy stainless steel heating elements. Steam or combination heating available as an option.
IM8 Microprocessor
Please refer to the specifications sheet for more information.
Self-diagnosis of faults , cycle counter, operating hours counter, automatic reminder of maintenance operations, storage of detected faults.
Program updates via keyboard or PC, or remotely via integrated GSM module
Expectations to anticipate:
Light ground anchoring is recommended, as shown in the diagram below, or rubber feet are available upon request.
Electrical supply with differential protection / 22A power at 400V 3+N+E (5A if steam heating) + electrical cable
Cold water inlet 3/4", pressure 2 to 6 bar, with shut-off valve
Hot water inlet 3/4", pressure 2 to 6 bar, with shut-off valve
2 water pipes with 3/4" female fittings
Free-flowing drain, 50mm diameter or larger
GSM Connect: The best customer service!
Remote program updates
Automatic reminder of maintenance operations
Real-time reporting of malfunctions
Remote diagnosis
Noise level: 70 dB
Connected power: 14 kW
Dimensions (L x H x D): 880 x 1279 x 966 mm
Packaged dimensions (L x H x D): 1000 x 1470 x 1200 mm
Weight: 450 kg
List of available options:
- Steam heating
- Mixed electric/steam heating with front panel switch
- Peristaltic pump
- Special voltage
PDF specifications sheet
