LM14IM8 Industrial High Spin Washing Machine
High-spin washing machine for institutions, dry cleaners, etc.
One-piece cast iron housing with 2 SKF bearings and graphite bushing sealing
Stainless steel tank, drum and body
Large 400 mm loading opening
IM8 microprocessor (see datasheet for more information)
Reduced water consumption
Inverter frequency converter motor
Electric heating via Incoloy stainless steel elements and/or direct steam
2-year warranty on all parts / 4-year warranty on the landing
Tank, drum, front and side top panels in AISI304 stainless steel
Heavy-duty welded steel frame
Suspended tank with 8 combined spring and shock absorbers
Laundry capacity 14 kg, drum 140 litres diameter 700 mm
One-piece cast iron bearing on the rear of the drum, supported by a robust, welded A-frame frame to absorb vibrations
2 oversized SKF bearings with grease fittings, shaft sealing by graphite rings
Cast iron pulley drive with 2 V-belts
Three-phase motor with thermal-magnetic overload protection, 2 kW power
Spin speed 950 rpm / G factor 353
A 400 mm diameter porthole ensures fast loading/unloading.
ISO standard 3-point detergent dispenser, on top of the washing machine
Electric heater with 3 x 3 kW stainless steel heating elements Incoloy
Steam or combination heating available as an option
Water level management accurate to the centimeter, for very economical use
Self-diagnosis of faults, cycle counter, operating hours counter, automatic reminder of maintenance operations, storage of detected faults.
Expectations to anticipate:
- Light anchoring in the ground is recommended, as shown in the diagram below, or rubber feet are available upon request.
- Electrical supply with differential protection / 17A power rating at 400V 3+N+E (4A if steam heating) + electrical cable
- Cold water inlet 3/4", pressure 2 to 6 bar, with shut-off valve
- Hot water inlet 3/4", pressure 2 to 6 bar, with shut-off valve
- 2 water pipes with 3/4" female fittings
- Free-flowing drain with a diameter of 50 mm or more
GSM Connect - The best customer service!
Remote program updates via the included IM6 option
Automatic reminder of maintenance operations
Real-time reporting of malfunctions
Remote diagnosis
Noise level: 70 dB
Connected power: 11 kW
Dimensions (L x H x D): 880 x 1279 x 861 mm
Packaged dimensions (L x H x D): 1000 x 1470 x 1200 mm
Weight: 420 kg
List of available options:
- Steam heating
- Mixed electric/steam heating with front panel switch
- Peristaltic pump
- Special voltage
PDF specifications sheet
